Skip directly to content

No data was found in order to be able to use the app offline. Would you like to download the data now?

Back

smart fortwo Model C451 Coupé, 2012 - 2015

Pictogramm des Antriebs Electric

  • Schrägansicht des Fahrzeugs von vorne links
  • Schrägansicht des Fahrzeugs von hinten rechts
Strichzeichnung des Fahrzeugs mit Markierungen der sicherheitsrelevanten Komponenten und Rettungspunkten.
  • Battery 12 V

  • High-voltage battery

  • High-voltage disconnect device

  • Windowbag (USA only)

  • Pictogram for Airbag

    Airbag

  • Pictogram for Gas generator

    Gas generator

  • Pictogram for Seat belt tensioner

    Seat belt tensioner

  • Pictogram for Gas-filled strut

    Gas-filled strut

  • Pictogram for Body reinforcement

    Body reinforcement

  • Pictogram for Restraint systems control unit

    Restraint systems control unit

  • Pictogram for 12 V Battery

    12 V Battery

  • Pictogram for High-voltage battery

    High-voltage battery

  • Pictogram for High-voltage components

    High-voltage components

Note: Please see our emergency response guide for more information

1. Identification / recognition

3. Disable direct hazards / safety regulations

Deactivation of the high-voltage system

In all other cases, the high-voltage system should be deactivated as follows:

High-voltage disconnect

The high-voltage disconnect device is located on the underside of the instrument panel on the left side.

Pull connector (1) out of bracket

Pictogram for danger

In order to ensure that there is no longer any residual voltage in the high-voltage system, wait approx. 20 seconds after switching it off.

Pictogram for danger

The passive safety systems such as airbags and seat belt pretensioners will continue to be supplied with power by the 12-volt electrical system.

Disconnecting the 12 V battery

1. Remove the cover from the 12-volt battery.
2. Disconnect the negative cable of the 12-volt battery at the screw connection and secure it against unintentional contact.